T: 01823 270781
M: 07791554931
E: [email protected]

Project Stereo Box S Phono


Stereo Box S Phono

The Pro-Ject Stereo Box S Phono is a combination of the Stereo Amp Box S, Pre Box S and Phono MM, in one stylish body, offering exceptional sound quality. The new "S" body design makes the Stereo Box S Phono a slim and elegant looking device.

The amplifier can be controlled with a slim-line IR remote, or via the simple and minimal front-facing controls. A 'Record Out' is also included on the back of the device, allowing the Stereo Box S Phono to be partnered with other stereo components like the Head Box! 

The built in phono stage is capable of accommodating moving magnet cartridges so no matter what cartridge you have you're covered.

Key Features:

  • 2 x 37 watts @ 4 ohms
  • 2 ohm drive capability
  • Low noise pure analogue audio circuitry
  • Dual mono design principle
  • 3 stereo lines and phono input (RCA)
  • Fixed line level record out
  • Motor drive potentiometer
  • IR remote included 
  • 2 different face-plate colours, black or silver

Technical Data:

Output Power:
2 x 25W @ 8Ω (Both Channels Driven)
2 x 37W @ 4Ω (Both Channels Driven)
Frequency Response:20Hz - 20kHz (- 0.3dB, -2.5dB)
Channel Separation: > 40dB at 20kHz 
Noise Floor: > -100dB (A weighted) 
THD: <0.05% at 10W 
Gain: 22dB 
Line-Level Inputs:2 Pair RCA/Phono Sockets, 3.5mm Co-Axial Jack
Phono Amplifier:Moving Magnet (MM)
RIAA- EQ Curve Accuracy: 20Hz - 20kHz / Max. 0.5dB 
Input Impedance: 20kohms 
Speaker Connections: 4mm Banana Plugs, Spades Connectors or Naked Wire 
Power Supply:20V / 3A DC
Power Consumption:3A DC, <1W In Standy
Dimensions (W x H x D):206 x 40 x 150mm (165mm W/Sockets)
Weight:1250g (Without PSU)